Cisco Router ISR 1100

GE

N/A

GE/SFP combo

1

ADSL2/VDSL2+

1 G.FAST
(Annex A)

LTE Advanced (CAT6)

N/A

802.11ac

2X2 MIMO

GE

8

PoE

4

PoE+

2

Integrated USB 3.0 AUX/console

Yes

Lightweight, compact size with low power consumption

●Can be deployed in many different environments where space, heat dissipation, and low power consumption are critical factors.

High performance to run concurrent services

●High performance allows customers to take advantage of broadband network speeds while running secure, concurrent data, voice, video, and wireless services.

High availability and business continuity

● Redundant WAN connections for failover protection and load balancing.

● Dynamic failover protocols such as Virtual Router Redundancy Protocol (VRRP; RFC 2338), Hot Standby Router Protocol (HSRP), and Multigroup HSRP (MHSRP).

Consistent, high application performance levels

● The router can run multiple services simultaneously with minimal performance degradation.

Risk mitigation with multilevel security

● Network perimeter security with integrated application inspection firewall.

● Data privacy through high-speed IP Security (IPsec) Triple Data Encryption Standard (3DES), and Advanced Encryption Standard (AES) encryption.

● High-performance VPNs: DMVPN, FlexVPN, GET VPN, EzVPN

● Cisco Umbrella™ security architecture to provide content filtering via category-based URL classification and blocking, thus helping increase productivity and providing better use of company resources.

● Enforced security policy with OpenDNS.

● Security hardware acceleration.

● Trustworthy systems with Field-Programmable Gate Array (FPGA) and hardware anchor.

● Encrypted traffic analytics maintain integrity of encrypted flow

Unified control of wired and wireless networks from a common console for streamlined operations

● Simplifies and centralizes configuration and management of wireless and wireline devices. Supports WLAN services without requiring a wireless LAN controller.

● Supports Mobility Express for WLAN-enabled routers.

Remote configuration and management to keep local IT staff lean

● Supports separate console/auxiliary and USB ports.

● Can be configured to work with optional USB token.

● Supports TR-069.

Performance

● Throughput

● Service reliability

● Crypto performance up to 250 Mbps for 1100-8P and 150 Mbps for 1100-4P.

● A distributed multicore architecture with the industry’s first internal services plane.

● Remote installation of application-aware services that run identically to their counterparts in dedicated appliances.

Lower WAN expenditures

● Cisco Software-Defined WAN (SD-WAN) (over the Cisco Application Policy Infrastructure Controller Enterprise Module [APIC-EM]) support for optimized WAN connection.

Pay as you grow: IPsec performance upgrade model

● Router IPsec capacity can be increased with a remote performance-on-demand license upgrade (no hardware upgrade) for exceptional savings andCapEx budget management.

IT consolidation, space savings, and improved Total Cost of Ownership (TCO)

● Single converged branch platform integrates routing, switching, security, and performance management capabilities.

Business continuity and increased resiliency

● The entire 1100 Series supports Power over Ethernet (PoE) and PoE+ power to endpoints.

C1-SL-1100-8P-APP

AppX Foundation License for Cisco ISR 1100 8P Series

SL-1100-8P-SEC

Security License for Cisco ISR 1100 8P Series

SL-1100-8P-SECNPE

NPE Security License for Cisco ISR 1100 8P Series

C1-SL-1100-8P-SEC

Security Foundation License for Cisco ISR 1100 8P Series

FL-VPERF-8P-200

IPSEC PLUS 200 Mbps License for Cisco ISR 1100 8P Series

GLC-EX-SMD

1000BASE-EX SFP transceiver module, SMF, 1310nm, DOM.

GLC-LH-SMD

GE SFP, LC connector LX/LH transceiver; with DOM.

GLC-SX-MMD

GE SFP, LC connector SX transceiver; with DOM.

GLC-ZX-SMD

1000BASE-ZX SFP; with DOM.

GLC-FE-100ZX

100BASE-ZX SFP (80km).

GLC-BX-D

1000BASE-BX SFP, 1490NM.

GLC-BX-U

1000BASE-BX SFP, 1310NM.

WAN GE

N/A

N/A

WAN GE/SFP combo

1

1

ADSL2/VDSL2+

1 G.FAST
(Annex B)

1 G.FAST
(Annex A)

LTE Advanced (CAT6)

N/A

N/A

802.11ac

2X2 MIMO

2X2 MIMO

LAN GE

8

8

PoE

4

4

PoE+

2

2

Integrated USB 3.0 AUX/console

Yes

Yes

GE

N/A

GE/SFP combo

1

ADSL2/VDSL2+

1 G.FAST
(Annex A)

LTE Advanced (CAT6)

N/A

802.11ac

2X2 MIMO

GE

8

PoE

4

PoE+

2

Integrated USB 3.0 AUX/console

Yes

Memory (default and maximum)

DRAM: 4 GB

Flash: 4 GB

Console

· Micro USB console (USB 3.0).

Mini-USB port (reserved)

· Micro-USB port to support remote LTE diagnostics and monitoring tools (Qualcomm CAIT and Spirent UDM) (USB 3.0).

802.11ac

· 2x2 SU-MIMO/MU-MIMO with two spatial streams.

· Maximal Ratio Combining (MRC).

· 20-, 40-, and 80-MHz channels.

· PHY data rates up to 866.7 Mbps (80 MHz on 5 GHz).

· Packet aggregation: A-MPDU (Tx/Rx), A-MSDU (Rx).

· 802.11 Dynamic Frequency Selection (DFS).

· Cyclic Shift Diversity (CSD) support.

Software

· Cisco Unified Wireless Network Software with AireOS Wireless Controllers Release 8.5
(8.7 for 1101 series) MR1 or later.

DSL interfaces

· G.FAST (spectrum up to 106MHz) Annex A, Annex B, Annex M and compatible with ADSL2/2+ and VDSL2.

· ITU G.993.2 (VDSL2) and supported profiles: 8a, 8b, 8c, 8d, 12a, 12b, 17a, and 35b.

· ITU G.9700/9701/997.2 G.FAST and supported profiles: 106a, and 106b.

External power supply

· AC input voltage: Universal 100 to 240 VAC.

· Frequency: 50 to 60 Hz.

· Maximum output power: 66W (default).

· Output voltages: 12 VDC.

· Optional PoE and PoE+:

◦   Single 150W power supply required for Cisco 1100-8P series router

◦   Single 115W power supply required for Cisco 1100-4P series router

· External output voltage: 48 VDC.

USB 3.0

· USB devices supported:

◦   USB eTokens and USB flash memory

· Note: Devices USB 3.0 supports to be connected externally.

LEDs

· WWAN (green/amber).

· SIM status (green/amber).

· Received signal strength indication (RSSI) bar (green).

· 3G/LTE service (green/amber).

· GPS (green/amber).

· Speed and link for Gigabit Ethernet WAN port (green).

· Speed and link for all Fast Ethernet LAN ports (green).

Physical dimensions

(H x W x D)

C111X Models

·  1.75 x 12.7 x 9.6 in. (44 x 323 x 244 mm) (includes rubber feet on LTE models).

·  1.75 x 12.7 x 9.03 in. (42 x 323 x 230mm) (includes rubber feet on non-LTE models).

C1101-4PLTEP and C1101-4PLTEPWX Models

·  1.73 x 9.75 x 6.6 in. (43.9 x 247.6 x 167.6 mm) (includes rubber feet models).

Weight

C111X Models

· 1.94 lb to 4.59 lb (1.94kg to 2.08 kg).

· 4.50 lb (2.04 kg) with LTE Advanced.

· 4.76 lb (2.16 kg) with Wave 2 802.11ac Dual Radio.

· 4.89 lb (2.22 kg) with LTE Advanced plus Wave 2 802.11ac Dual Radio.

Environmental operating range

· Nonoperating temperature: -4° to 149°F (-0° to 65°C).

· Nonoperating humidity: 5% to 95% relative humidity (noncondensing).

· Nonoperating altitude: 0 to 15,000 ft (0 to 4570 m).

· Operating temperature: 32° to 104°F (0° to 40°C). C1101 support 32° to 113°F (0° to 45°C).

· Operating humidity: 10% to 85% relative humidity (noncondensing).

· Operating altitude: 0 to 10,000 ft (0 to 3000 m).