SR8808H-X
- Product description
- Logistics & Payment
- Warranty description
- Evaluation
- Download related information
Properties | SR8802-X-S | SR8803-X-S | SR8806-X-S | SR8810-X-S | SR8804-X | SR8808-X | SR8808H-X | |
Exchange capacity Amount/bps | 133.33 T | 133.33 T | 133.33 T | 133.33 T | 130.16 T | 195.24 T | 195.24 T | |
Packet forwarding Rate/pps | 6000~ 16800M | 9000~ 25200M | 18000~ 50400M | 30000~ 84000M | 12000~ 86400M | 38400~ 172800M | 38400~ 172800M | |
Single slot maximum forwarding capacity/bps | 480G | 480G | 480G | 480G | 2T | 2T | 2T | |
Main Control Board | 2 | 2 | 2 | 2 | 2 | 2 | 2 | |
Service Board | Eight | Twelve | Twenty four | Forty | Sixteen | Thirty two | Thirty two | |
Line card Board | 2 | 3 | 6 | Ten | Four | Eight | Eight | |
SFU | 2 block switching network Board (N+M redundancy) | 2 block switching network Board (N+M redundancy) | 2 block switching network Board (N+M redundancy) | 2 block switching network Board (N+M redundancy) | 4 blocks are independent switching network Board (N+M redundancy) | 4 blocks are independent switching network Board (N+M redundancy) | 5 block independent switching network Board (N+M redundancy) | |
Total slot number(line Card+Master+separate SFU) | Four | Five | Eight | Twelve | Ten | Fourteen | Fifteen | |
Structure | Integrated chassis that can be installed in 19-inch rack | |||||||
Power supply System | 2 power supply (N+M redundancy) | 4 power supply (N+M redundancy) | 4 power supply (N+M redundancy) | 4 power supply (N+M redundancy) | 4 power supply (N+M redundancy) | 6 power supply (N+M redundancy) | 8 power supply (N+M redundancy) | |
Dimensions/mm (W×D×H) | 436×420×175(4RU) | 436×420×441(10RU) | 436×420×575(13RU) | 436×420×708(16RU) | 440×660×353(8RU) | 440×660×930(21RU) | 440×640×931(21RU) | |
Interface Type | Support FE, GE, 10GE LAN/WAN, and 25Ge, the 40Ge, the 50Ge, the 100Ge, the 155M POS, 622M POS, 2.5 G POS, 10G POS, CPOS interface, 155M ATM, 622M ATM, E1/T1 interface Support 100Ge/40Ge port switch Support 155M POS/622M POS/Ge port switch Support ATM/POS port switch Support 155M ATM/622M ATM port switch | |||||||
Unicast Routing | Support IPv4 and IPv6 dual Protocol stack Support static routing, RIP, RIPv2, And RIPng, OSPF, OSPFv3, IS-IS, IS-ISv6, And BGPv4, and BGP4+, MP-BGP Support VRRP, VRRPv3 Supports IPv6 neighbor discovery, PMTU discovery, TCP6, ping IPv6, traceroute IPv6, socket IPv6, static IPv6 DNS, specifying the IPv6 DNS server, TFTP IPv6 client Support of IPv4 to IPv6 transition technologies Support ICMPv6 MIB, UDP6 MIB, TCP6 MIB, and IPv6 MIB, etc. Support the equivalent routing ECMP, the non-equivalent routing UCMP Support policy-based routing Support routing policy Support for GRE and other tunneling Support for static route FRR, OSPF FRR, ISIS FRR, BGP FRR, OSPFv3 FRR | |||||||
Multicast | 支持PIM-DM、PIM-SM、PIM-SSM、MSDP、MBGP、Anycast-RP等路由协议 支持IGMP V1/V2/V3、IGMP Snooping V1/2/3 支持PIM6-DM、PIM6-SM、PIM6-SSM 支持MLD(Multicast Listener Discovery) V1/V2、MLD Snooping V1 支持组播策略和组播QoS Support BIER function | |||||||
MPLS VPN | Support for the LDP, RSVP-TE, etc. MPLS label distribution Protocol Support P/PE function, in line with RFC2547bis Protocol Support three kinds of cross-domain MPLS VPN ways Option1/Option2/Option3) Supports hierarchical PE(HoPE) Support multi-role host Support two-layer, three-layer VPN, cross-domain L2, L3 VPN implementation Support for VPLS and VPWS Supports MPLS TE FRR and LDP FRR, the switching time less than 50ms Supports 6PE and 6vPE Support for distributed multicast VPN Support ACL to identify the traffic function, the traffic is imported to a different VPN Supports MPLS VPN network fault location function, support MPLS PING/TRACEROUTE Support L2 VPN and L3 VPN Support QinQ mode VPLS access | |||||||
BRAS Business | Support PPPoE, PPPoEoVLAN, the PPPoEoQ access authentication Support PPPoX function, support PPPoA, And PPPoEoA access authentication To support the second floor of the Portal, the three layers Portal, QinQ Portal access authentication Supports IPoE, the IPoEoVLAN, the IPoEoQ access authentication Support the subnet line, interface, line, L2VPN leased line leased line access authentication Support L2TP technology Support two layers of non-perceptual access, three-layer non-aware access Supports standard RADIUS/ TACACS+Protocol with the completion of a remote user authentication, authorization, accounting and other management functions Support Radius, TACACS, Diameter, COPS etc. Protocol Support iTA(intelligent targeting billing, according to the destination address to distinguish between different types of business, users achieve different types of business accounting, bandwidth control and QoS, etc. Support wired and wireless unified authentication solution, by mass BRAS to meet the massive user terminal access requirements, meet the wireless terminal mobility needs Support BRAS IRF function in Meet-redundant hot standby, based on can simplify the operation and maintenance work Support VSRP way to hot standby | |||||||
Value-added Business | Support the IPSec function, the link types are as follows: high-speed link interface FE, GE, 10Ge, and 40Ge, the 50Ge, the 100Ge, 2.5 G POS, 10G POS, the low-speed link interface, 155M POS, 622M POS, CPOS interface, 155M ATM, 622M ATM, E1/T1 Support SSL VPN feature Support high-precision NAT capability: CGN (Carrier Grade NAT)feature Support for 1588 V2 features | |||||||
Virtualization Characteristics | Support virtualization technology, with more than one physical device virtualized into one logical device, the unified management interface, the unified forwarding table entries, Cross-Device Link bundling | |||||||
ACL | Supports IPv4 and IPv6 standard access control lists and extended access control list EACL) Support based on the second layer, third layer and the fourth layer of the ACL Support Ingress/Egress ACL Support for hardware access control list | |||||||
QoS | Supports hierarchical QoS H-QoS support PQ/WFQ/CBWFQ such as queue scheduling mechanism Support 5-level H-QoS scheduling to ensure that the refinement of business management Support traffic shaping Shapping Support the tail drop TD /WRED and other congestion avoidance techniques Support priority tag Mark/Remark, support 802. 1p, TOS, DSCP, EXP priority mapping Supports congestion avoidance, traffic policing and shaping feature Car, traffic Shaping, etc. Support data packet marking function based on IP address, port number, 802.1 P, DSCP value, etc. Support data pack multi-level queue mechanisms, including CQ, PQ, the LLQ, WFQ, etc. Support multicast QoS function Support 200ms cache Support QPPB, support for MPLS TE Qos function | |||||||
Ethernet Features | Support 802. 1Q Support ARP Protocol Supports 802.1 Q VLAN Trunk function Support QinQ termination Support 802. 3d(STP)/802.3 w(RSTP)/802.3 s(MSTP) Supports IEEE 802.3 ad port aggregation and static port aggregation and cross-Board port aggregation Support different rates port aggregation function Support port mirroring SPAN/RSPAN, and flow mirroring function Support FlexE Support sub-interfaces slice | |||||||
SDN Technology | Support VXLAN layer gateway, VXLAN three-layer gateway, distributed and centralized) Support EVPN VXLAN layer gateway, EVPN VXLAN three-layer gateway, distributed and centralized) Support PCEP Protocol Supports BGP-LS and other network information collection Protocol Support Netconf and YANG agreement Support for Segment routing Support CBTS Support for Openflow v1. 3 Protocol Support for BGP FlowSpec feature Support Telemetry Protocol Support SRv6-Policy-based delay/bandwidth/packet loss rate tuning capability Support SRv6 Policy failure escape to the SRv6 BE functional | |||||||
Network stream Analysis | Supports Netstream, consistent with the V5/V8/V9 output format, the supported sampling function and the flow statistics function Support multi-log host function Supported hardware network traffic analysis techniques Support IPv4/IPv6/MPLS traffic acquisition and analysis Support port access direction of the flow collection and analysis Support abnormal traffic detection and monitoring function(host-monitor) | |||||||
Reliability | Key components of the main control Board and switching network Board, power supply, fan support redundant backup Support the master, business separation, support the child of the mother card architecture The backplane uses passive design, avoid single point of failure Using the Network Processor(NP architecture design, superimposed service does not affect the forwarding capacity The components support hot-swapping, hot-swappable switching network Board without plug fan module Support intelligent fan speed control To support the detection and control of the machine frame and the room environment, the amount to include smoke and temperature status of the monitoring module, and triggered by alarm or detection of the information reported, the realization of the Cabinet and room work environment real-time monitoring Support, built-in DC, AC source, to support the integration of power supply, the power supply slot is not occupied by business or a sub-card slot Support error code switching Support for nonstop forwarding NSF, the nonstop routing NSR and GR Support NSR for OSPF/OSPFv3/ISIS/ISISv6/BGP/BGP4+/VRRP/IPv6 VRRP/PIM/LDP/MPLS L3VPN/6VPE/MPLS TE Support IP TRUNK, MP, ETH port aggregation Support the PW redundancy, MPLS/Ethernet OAM, Y. 1731, and routing Protocol/port/VLAN Damping and other protection mechanisms Support BFD, the achievement of the Protocol of fast failure detection mechanisms to a minimum detection time 3. 3ms, the failover time is less than 50ms Support comprehensive FRR feature: IP/IPv6/LDP/TE/VPNv4/VPNv6 FRR, the service switching time less than 50ms network availability of 99. 999% Support iFIT with the flow detection, can detect real-time network fault, and quickly locate fault points, and support for detecting access to performance data visualization management Support RFC2544, supports automated contract testing throughput, delay, jitter and packet loss detection links, etc. MTBF(MTBF)of greater than 20 years | |||||||
Work Environment | Working Temperature:-40-65℃ |
Uritmall.com sends goods through international express delivery companies (Beijing, Shenzhen, Hong Kong three major Warehouses) .Logistics supports DHL, FedEx, TNT, UPS, SF-Express and other third-party freight forwarders.
We prefer to recommend Fedex, DHL and SF-express,And transportation options are prioritized so that you can receive goods quickly and enjoy better service and higher shipping discounts.
Normally, during the legal working day of the working day in China, we will issue the goods on the day of confirming the successful payment of your order.During the non-Chinese legal working day, we will issue the goods within 72 hours after confirming that your order has been paid successfully.
Shipping Zones | By Express | By Air Cargo |
Asia | 1-2 Days | 2-3 Days |
North America | 2-3 Days | 2-3 Days |
South America | 3-4 Days | 4-5 Days |
Europe | 2-3 Days | 3-4 Days |
Oceania | 2-3 Days | 3-4 Days |
Africa | 3-5 Days | 4-7 Days |
Middle East | 3-5 Days | 4-7 Days |
Uritmall.com accepts these payment options for your convenience.
When you buy from our online shopping mall, please choose to pay online through the platform:Mall supports PayPal、VISA、MasterCard、DISCOVER、AMERICAN EXPRESS and UnionPay online payment
If you choose the following payment method, please place an order in our mall in advance, and prepare the order number and order details to send to the mailbox:order@uritmall.com and continue to pay, we will update the order status after receiving the payment check.
If you need cash, check or Escrow payment method, Please call: +00852-51736677
Pay us directly by clicking on the PayPal payment link. The PayPal payment link is:PayPal.Me/uritmall
uritmall.com Warranty and Return Policy
If there is any problem you want to return ,please contact us by mail or phone as soon as possible, we will do our best to solve it.
We supply one year warranty for new items, and supply 90 days for used&refurbished items.
Defective/non-working items are replaced in a timely manner(when customers get them and test them in three days). Customers should test items when they got them in 3 work days, if there is any prblems with goods, please notify us in the same day ,not more day 3 days, or we will think items work well and go into warranty.If there is for any reason the item(s) cannot be replaced with a similar or a better one,uritmall.com will issue a refund. Returning a working product is subject to a 20% re-stocking fee and must be made within 14 days of original date of purchase and the returning items must be in good condition as we shipped out.